ETS SunQuest Pro 16ST, Руководство пользователя

Страница: 8 / 24

4
Installation - Assembly Procedures
26487-02A
Attaching Legs to Bench
Lay the bench upside down on the floor.
Locate the two stand legs and attach to the
bench as shown below.
2. Turn bench right side up on floor.
Place so that the power cord connec-
tor is facing toward the wall outlet.
1. Using the six 5/16” x 1” bolts and the
six larger 5/16” washers already
installed in the bench, attach the
stand legs with the skirt mounting
holes toward the back of the bench
as shown. Install center bolt first. You
may have to gently push the sides of
the legs in to align holes. Tighten
with the Allen wrench.
(ELECTRICAL CONNECTOR INDICATES
BACK OF BENCH)