ETS SunQuest Pro 16ST, Руководство пользователя

Страница: 20 / 24

16
26487-02A
roubleshooting
Problem Solution
Lamps fail to light
One or more lamps fail to
light
Canopy fails to stay in the up
or down position
Sunbed does not stay lit
1. Check source of AC power. Reset circuit breaker or
replace fuse if necessary.
2. Make sure the unit is plugged into outlet.
3. Make sure cord between canopy and bench is
properly connected.
4. Make sure timer dial is turned to a number past 0.
5. Make sure Parental Lock is in the vertical position.
1. Check that lamp is installed correctly.
2. Switch unlit lamp with a lamp that lights. If the new
lamp lights and the old lamp still does not, replace
old lamp.
3. If replacing lamp does not remedy problem, con-
tact your service representative.
Gas springs should hold the canopy fully open as
well as allow it to rest fully closed. If the canopy is
left open for an extended period of time it may
creep down. This is considered normal. Keep the
canopy closed when not in use. Replace gas springs
when they no longer have sufficient power to hold
the canopy open when raised.
1. Check source of AC power. Reset circuit breaker or
replace fuse if necessary.
2. Check timer system per maintenance instructions in
this guide. Contact your service representative.