ETS solarforce 648, Руководство пользователя

Страница: 41 / 48

27971-01A
Care and Maintenance - Under the Bench
36
Under the Bench
Lift the bench acrylic (see Lamp and
Acrylic Replacement ). The front access
panel is held in place by four Phillips
head screws. Remove the access panel.
Canopy Lift Adjustment
Your sunbed uses a smooth gliding spring
lift system to raise the canopy. Periodically
this lift system may need to be adjusted
slightly. Use a 7/8” wrench (or ratchet
wrench) to turn the hex shaped Lift
Adjustment lugs (shown below), clock-
wise for more lift and counterclockwise
for less. When adjusted properly, the
canopy should raise easily as well as rest
fully closed. Always adjust both lugs
equally.
Air Filter Replacement
The bench contains three air filters, one
on top of the ballast drawer and two
inside the right pedestal. The filter on top
of the ballast drawer simply sits on the
drawer and is held in place by airflow
when the unit is running. Replace with a
standard 10” x 24” x 1” furnace filter. The
airflow indicator should point down.
Thumb screws secure an access plate
onto the right pedestal. Using your fin-
gers, loosen the screws to remove this
plate. Behind it are two air filters. Pull
them straight out. Replace with standard
12” x 18” x 1” furnace filters. The airflow
arrows should point toward the head end.
BALLAST DRAWER
ACCESS PLATE
HOUR COUNTER
LIFT ADJUSTMENT LUG
LIFT ADJUSTMENT LUG