27971-01A
Operation - Using Your Sunbed
29
1.
Lift canopy, lie down on bench (face up),
lower canopy toward your body. See
Safety Information
for positioning require-
ments.
2.
Put on your safety goggles.
3.
Assuming the remote system has been set
to allow a pre-tanning delay time, the
timer display (D) will count down the
remaining delay time. Press the START
button (A) or wait until the delay time has
expired to begin the tanning session. The
lamps will turn on and the timer will
begin to count down.
4.
When the timer reaches 0 the lamps turn off.
If you want to interrupt your session before
time expires, press the STOP button (F).
5.
Raise the canopy by using the canopy han-
dle, do not push up on the acrylic shield.
The cooling fans run for a period of time
after the lamps shut off to aid in cooling
the sunbed. The timer will indicate “:” as a
reminder to clean the sunbed. After the
sunbed is cleaned press the START button
and the display will return to “0:00”.
Using Your Sunbed
When connected to the T-Max® Manager or T-Max® 1A or 3A.
WARNING
Wear protective eyewear.
Failure to may result in severe burns or
longterm injury to the eyes.
A START button
- Turns unit on. Timer
display shows remaining time.
B Face tanner button
- Turns face tanner
on and off. Display shows status.
C Shoulder tanner button
- Turns shoul-
der lamps on and off. Display shows
status.
D Timer display
- Displays remaining time
and function status.
E Body fan buttons
- Adjusts body cool-
ing. Timer display shows intensity (1-
2-3).
F STOP button
- Interrupts tanning session.
A
B
C
D
E
F
Содержание solarforce 648
Страница 1: ...27971 01A...
Страница 45: ...27971 01A 40 Notes...
Страница 46: ...27971 01A 41 Notes...
