1
1.0 GENERAL
Many applications, such as electronics, medical, pharmaceutical and research
require a controlled environment for testing, assembly or storage. The Model 5506 is
designed to meet these requirements. The Model 5506 is available in standard or
custom configurations to meet specific customer requirements.
1.1
Basic Chambers
Model 5506-00: Enclosure only without glove ports
Model 5506-11: Enclosure only with 8” (203mm) glove ports (Fig. 1.1-1)
Figure 1.1-1: Model 5506-11
1.2 Standard
Packages
The ability of the chamber to reach and then hold a given humidity level along
with humidity gradients is a function of the chamber (size, configuration etc.),
temperature, operating systems and controllers used. The following packages
provide solutions to most dehumidification applications. Chambers can also
be custom configured to meet special user requirements.
The following charts show the time typically required to decrease and
increase humidity (Blue = RH, Red = T
°
C) plus humidity gradients using
an ETS Controller in conjunction with the Model 5461 Desiccant/Pump
Dehumidification System.