ETS-Lindgren 8100-040, Руководство пользователя

Страница: 28 / 44

28
Operation www.ets-lindgren.com
The following command sequences result from this:
Function Command (String)
Go to remote REMOTE
Go to local LOCAL
Amplifier on (Operate) AMP_ON
Amplifier off (Standby) AMP_OFF
Amplifier on/off status AMP?
Amplifier identification *IDN?
Amplifier reset *RST
Control status CONTROL?
Figure 11: IEEE interface commands
Messages Sent by the Amplifier in Talker Mode
(Device to Controller Messages)
The amplifier transmits messages via the IEEE-488.2 GPIB-bus if it has been
requested by a query command to provide data in its output buffer and has
been addressed as talker.
Note that the command line with the data requests must be transmitted
immediately before addressing as talker. The output buffer is cleared if
another command line is entered in between.
Transferring the Device Status
The status messages of the amplifier indicated at the display on the front
panel are transferred as a text via the IEEE-488.2 GPIB interface to the
controller. For this purpose, the status text must be polled first (see control
character sequence above). The text can then be transmitted in a standard
reading process. The amplifier transfers the text also with "Line feed" as the
terminator.