ETS-Lindgren 8100-040, Руководство пользователя, Страница: 19 / 44

www.ets-lindgren.com Operation
19
Status
Standby
Operate Control
M5
M5
700 – 6000 MHz
8100-041 RF Power Amplifier
1 2
3 4
6.0 Operation
CAUTION: Before placing into operation, follow the information provided
in Safety Information on page vi.
Note: Make sure you are satisfied with the contents and condition of your
system prior to placing it into operation.
Front Panel View
Figure 4: Front panel view
1 STATUS LED LED is illuminated when a fault occurs,
which shuts down the amplifier
2 DISPLAY Status Display
Amplifier Status See chapter 6, Operation , on page 19
Fault Indications See chapter 2, Maintenance , on page 9
Type of amplifier Indication of amplifier model number
Elapsed time meter Indication of hours in operation
GPIB-Address Setting of the GPIB-address
3 STANDBY/OPERATE KEY Key for switching the amplifier on/off
Display: OPERATE RF switched on (amplifier active)
Display: STANDBY RF switched off (amplifier in standby)
4 CONTROL KEY Key for switching to local control mode
Display: LOCAL Front panel control enabled
Display: GPIB IEEE 488.2 GPIB remote control enabled
Display: LAN Ethernet remote control enabled
Display: TTL TTL remote control enabled