ETOP ITX-E8 Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 87

ETOP ITX-E8 Скачать руководство пользователя страница 59

ITX-E8 User`s Manual

51

Security Option

Select whether the password is required every time the system boots or
only when you enter setup.

System

The system will not boot and access to Setup will be
denied if the correct password is not entered at the
prompt.

Setup

The system will boot, but access to Setup will be
denied if the correct password is not entered at the
prompt.

Note: To disable security, select PASSWORD SETTING at Main
Menu and then you will be asked to enter password. Do not type
anything and just press <Enter>, it will disable security. Once the
security is disabled, the system will boot and you can enter Setup
freely.

MPS Version Control For OS

The choice: 1.1, 1.4.

OS Select For DRAM > 64MB

Select OS2 only if you are running OS/2 operating system with greater
than 64MB of RAM on the system.

The choice: Non-OS2, OS2.

Video BIOS Shadow

Enabled copies Video BIOS to shadow RAM Improves performance.

The choice: Enabled, Disabled.

Small Logo(EPA) Show

The choice: Enabled, Disabled.

«
...
57
58
59
60
61
...
»

Содержание ITX-E8
























































































Отзывы:

Нет отзывов