Eton Satellit 750, Руководство пользователя

Страница: 9 / 72

SATELLIT
OWNER’S MANUAL
9
Additionally, each alarm can be programmable for a specific
weekday, playtime, and frequency.
1. With the radio off, perform a press and hold of one of the F1-4
buttons, causing the hour to flash, icon starts flashing. While
it’s still flashing, press one of the F1-7 buttons to highlight the
day(s) of the week for the alarm to turn on. For example, if alarm
1 is activated, it will go off on the selected weekday(s) every
week.
2. Use the tuning knob to set the hour, quick press PAGE TIME
button to cause the minutes to flash.
3. When they’re flashing, use the tuning knob to set the minutes,
then continue to quick press PAGE/TIME button to set/turn-off
alarm, ”DELAY-XX” will appear in the LCD, rotate tuning dial to
select your alarm playtime minutes from (1~99), then press this
button to cause memory page number to appear in the display.
The “PAGEXX” will appear in the LCD. Rotate the tuning dial
to select memory page number. Quick press F1-7 to select a
memory page number, then press again to confirm, the icon
will stop flashing. If no operation in 10 seconds during setting, it
will exit alarm setting mode automatically without setting the
alarm.
Activating and deactivating the alarms
With the radio off, quick press F1 button, “A1:XX:XX” (e.g. A1:12:30)
will appear in the LCD. The selected weekday number will be
displayed in the lineup of weekday. When the icon appears, it
means Alarm 1 is activated, press F1 button again, the icon will
disappear, it means Alarm 1 is deactivated, it will exit automatically
in 5 minutes with no operation.
If Alarm 1 is activated, press PAGE/TIME to confirm, quick press
F1-7 to select the desired weekday (Mon~Sun) for alarm to
activate, press again to confirm exit Alarm 1 on/off setting.
If Alarm 1 is deactivated, press PAGE/TIME button to confirm exit
Alarm 1 on/off setting.
The user can repeat the above-mentioned procedure to set Alarm
2~4.
USING THE LOCK FEATURE
Quick press button once, the icon will appear in the LCD,
means all buttons and knobs are locked. Press and hold button,
the icon will appear in the LCD, means all buttons and knobs are
unlocked.