Eton Satellit 750, Руководство пользователя

Страница: 20 / 72

SATELLIT
OWNER’S MANUAL
20
socket and to the output of the other system. Press TZ/LINE IN
button and “LINE IN” appears in the LCD, which indicates LINE IN
is on. Press this button again to turn it off LINE IN function
2. To route the audio output of your Satellit to another device,
turn it on, plug a 1/8 inch (3.5mm) stereo cord into the Satellit’s
Line in/out socket and into the other device’s Line IN socket.
Follow your external device’s line-in/out instructions.
Note:
When a cable is plugged into the Line in/out socket it will have no effect on
the internal speaker operation. The internal speaker will still play back audio. Also note
that the Line Input is a fixed amplitude output that cannot be controlled using the
volume knob.
HEADPHONE JACK 3.5MM
The Satellit’s headphone jack use is mutually exclusive with
the internal speaker. When headphones are plugged into the
headphone jack the internal speaker will be muted. The volume
of the signal from the headphone jack can be adjusted using the
volume knob.
VOLUME CONTROL
Rotate the volume knob upwards or downwards to get your
desired volume.
EXTERNAL ANTENNA SOCKET
The external antenna socket is used to connect the Satellit to
advanced performance shortwave antennas using a 50 or 75 ohm
coaxial cable feed-line when the user listens to FM/SW/AIR band.
Caution:
Do not use external antenna in lightning storms to avoid lightning strike.
NEED HELP? CONTACT US.
Etón Corporation
1015 Corporation Way, Palo Alto, CA 94303, USA 1-800-872-2228
(U.S.)
1-800-637-1648 (Canada)
650-903-3866 (worldwide)
M-F, 8:00AM-4:30PM, Pacific Standard Time
www.etoncorp.com
.
WARNING
• Do not expose this appliance to rain or moisture.
• Do not submerge or expose for extended period to water.
• Protect from high humidity and rain.
• Only operate within specified temperature range (0 °C to 40 °C).