Eton CXL-150 - SERVICE, Руководство по обслуживанию

Страница: 91 / 111

BATTERY REMOVAL
Remove the seat, and then you can see the battery.
Disconnect the negative cable and then the
position cable and remove the battery.
BATTERY INSTALLATION
Install the battery in the reverse order of removal. After installing the battery, coat the terminals with clean grease.
CHARGING
Connect the charge positive cable to the battery
Position terminal.
Connect the charge negative cable to the battery
negative terminal.
Using 0.9A-charging current about 5 hours. (Normal charging)
Or using 4A-charging current about 1 hour. (Quick charging)
Keep flames and sparks away from a battery being charged.
Quick charging should be limited to an emergency;
Normal charging is preferred.
12.6 ELECTRIC STARTER
Information
A week battery may be unable to run the starter motor
quickly enough. If the battery voltage is enough while
the engine is not Cranking, the starter motor
may be damaged.
91