Eton CXL-150 - SERVICE, Руководство по обслуживанию

Страница: 16 / 111

16
4.CYLINDER HEAD / VALVES
4.1 SERVICE INFORMATION 4.4 CYLINDER HEAD REMOVAL
4.2 TROUBLESHOOTING 4.5 CYLINDER HEAD INSTALLATION
4.3 CAMSHAFT COMPOSITION REMOVAL
4.1 SERVICE INFORMATION
GENERAL
This section describes cylinder head, valves, camshaft and the other parts maintenance. The engine must be
removed from the frame to service cylinder head. Camshaft lubrication oil is fed to the cylinder head through an
oil orifice in the engine case. Before installing the cylinder head be sure the orifice is not clogged and the gasket,
O-ring and dowel pins are in place.
SPECIFICATIONS
ITEM STANDARD SERVICE LIMIT
CYLINDER COMPRESSION 12±0.5 kg/cm
2
--------
IN 29.795 29.395
CAM LOBE HEIGHT
EX 29.560 29.160
ROCKER ARM I.D. 10.000-10.018 10.10
ROCKER ARM SHAFT O.D. 9.972-9.987 9.91
CYLINDER HEAD WARPAGE -------- 0.05
IN 32.3 31.2
VALVE SPRING FREE LENGTH
OUT 35.0 34.1
IN 4.975-4.990 4.90
VALVE STEM O.D.
EX 4.955-4.970 4.90
VALVE GUIDE I.D. IN/EX 5.000-5.012 5.30
IN 0.010-0.037 0.08
STEM-TO-GUIDE CLEARANCE
EX 0.030-0.057 0.10
IN 1.0 1.8
VALVE SEAT WIDTH
EX 1.0 1.8
TORQUE VALUES
Cylinder head bolts 8 ~ 12 n-m (0.8 ~ 1.2 kg-m)
Camshaft holder flange nuts 20 ~ 24 n-m (2.0 ~ 2.4 kg-m)
Tappet adjusting nut 9 ~ 12 n-m (0.9 ~ 1.2 kg-m)