Eton 70.011, Инструкция по эксплуатации

Страница: 9 / 16

8
Installation and wiring
With control via the Low-Level Inputs (also
referred to as RCA Inputs), connect the blue/
white color remote wire from the USB 6 AR to
the vehicle`s head unit so USB 6 AR will be
turn on and off with systems.
With control via the High-Level Inputs, first the
speaker harness will need to be spliced the
wire side of the splitter. Then connect the whi-
te wire to the left [+],white/black wire to the left
[-], grey to the right [+],and grey/black to the
right [-] corresponding vehicle wires, and final-
ly plug the supplied harness into the High-Le-
vel Inputs/power matching connector on the
amplifier panel of the subwoofer.
CAUTION:
(1) Use either RCA line
level OR speaker level
inputs. Do no connect
both at the same time.
(2) Make sure that the
switching voltage (blue/
white wire) is connected
when using the cinch
inputs!