![Etnyre M-752-02R1 Скачать руководство пользователя страница 5](http://html.mh-extra.com/html/etnyre/m-752-02r1/m-752-02r1_manual_2433794005.webp)
4
GENERAL
INFO & ID
Please note this warning and remember -
Always start and operate the engine in
a well ventilated area;
If in an enclosed area, vent the exhaust to
the outside;
Do not modify or tamper with the exhaust
system.
CALIFORNIA
Proposition 65 WARNING
Diesel engine exhaust and some of its
constituents are known to the State of
California to cause cancer, birth defects, and
other reproductive harm.
WARNING
Do not use this machine for any operation
which is not described in this manual.
If you have any questions about operation of
this machine, contact the Etnyre Service Dept
at: 1-800-995-2116 or 1-815-732-2116.
Operations that are not approved could cause
serious injury or death.
Safety Precautions,
Hazard Seriousness Level
You will find safety information boxes throughout
this manual. These boxes contain information alerting
you to situations or actions to avoid.
Signal words (DANGER, WARNING and CAU-
TION) are used to identify levels of hazard seriousness.
Their selection is based on the likely consequence of
human interaction with a hazard. Definitions of hazard
levels are as follows.
DANGER -
Immediate hazards which
will
result in severe personal injury or death.
WARNING -
Hazards or unsafe prac-
tices which
could
result in severe personal
injury or death.
CAUTION -
Hazards or unsafe practic-
es which could result in minor personal injury
or product or property damage.
WARNING
FLUOROELASTOMER HANDLING
Some O-rings and seals used in this vehicle
are made from fluoroelastomers, When used
under design conditions, fluoroelastomers do
not require special handling. However, when
fluoroelastomers are heated to temperatures
beyond their design temperature (around 600º
Fahrenheit), decomposition may occur with the
formation of hydrofluoric acid. Hydrofluoric acid
can be extremely corrosive to human tissue if
not handled properly.
A degraded seal may appear as a charred or
black sticky mass, Do not touch either the seal
or the surrounding equipment without wearing
neoprene or PVC gloves if degradation is
suspected. Wash parts and equipment with
10% lime water (calcium hydroxide solution) to
neutralize any hydrofluoric acid.
If contact with the skin occurs, wash the
affected areas immediately with water. Then
rub a 2.5 calcium gluconate gel into the skin
until there is no further irritation, while seeking
prompt medical attention.
Note to Physicians: For advice or treatment of
HF burns, call the DuPont Medical Emergency
number, 1-800-441-3637