9
GENERAL
INFO & ID
Webb Hubs
Torque Specifications (for Pilot Mounted Disc-Wheels)
8 or 10 Stud Hubs
Applies to M22 X 1.5 studs/two piece flange nut.
All threads are right hand metric.
1. Tighten Flange Nuts to 50 ft. lb. using sequence shown.
2. Check Disc-Wheel for proper positioning on pads and proper seating
against flange.
3. Tighten Flange Nuts to recommended torque (dry) of 450 - 500 ft-lbs
using sequence shown.
Recommended Torque Dry: 450 - 500 ft. lbs.
DANGER
Read and Understand the installation, service and safety instructions manual before
installing or servicing the hub. Failure to do so may result in personal injury or death, and
may result in a compromise of your vehicle’s safety through loss or failure of a wheel or
compromise the braking system.
Use a torque wrench to assure proper torque, failure to do so will compromise your products
service, life and safety. Under torque and over torque can cause thread and/or nut damage,
and may result in the loss of a wheel.
Recheck torque after the first 50 to 100 miles of service. Parts may seat naturally, causing
the torque to drop. Proper torque is essential for the service, life and safety of this product.
1
1
2
3
4
5
6
7
8
9
10
8
7
6
2
5
3
4
8 Stud Hubs
10 Stud Hubs
