ETNA FIV760 Series, Инструкция по эксплуатации

Страница: 48 / 56

EN 22
MALFUNCTIONS
Problem with the hob Possible cause Solution
Fault code F9 and/or
continuous beep. The appliance has been
connected incorrectly and/or
the mains voltage is too high. Have your connection
changed.
Fault code F99. You have pressed two or more
buttons at the same time. Do not operate more than
one button at a time.
Fault code FA. Mains voltage is too low. Contact your energy supplier.
Fault code FAN. Air circulation not good. Make sure the venting holes
under the cooking plate are
open.
Error code E6. Unsuitable pan. Visit www.atagservice.nl
for a suitable wok.
Hardware/software fault. Contact your service centre.
Other error codes Defective generator. Contact your service centre.
Problems with the oven Possible cause Solution
The oven light does not work. The oven light is defect. Replace the oven light.
The oven does not heat up. No temperature set. Set the temperature using the
temperature knob.
Electronic timer active. Set the electronic timer to
‘0:00’.
A visit by a service technician during the warranty period will be charged if the appliance
is not functioning because of improper use!