ETNA CALLISTO Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 24

ETNA CALLISTO Скачать руководство пользователя страница 19

Instruction for use CALLISTO

19

© ETNA Coffee Technologies b.v.

C O F F E E T E C H N O L O G I E S

☞

Make sure the pump cup is properly in place. Incorrect
assembly may cause incorrect dosing of product.

7. Push the spout into the hose of the peristaltic pump.
8. Slide the hose lock off the hose of the BIB so that the hose is no

longer closed.

9. Switch the machine on at the on/off switch.
10.Place a jug under the dispensing nozzle.
11.Press button 3 on the service panel on the inside of the door. Keep

this button pressed until the hose of the peristaltic pump is
completely filled.

12.Press button 1 on the service panel on the inside of the door. The

mixer will be rinsed with hot water.

13.Repeat step 12 until the mixer is clean.
14.Close the cover and the door of the machine.

7.2.2.2 Cleaning the peristaltic pump for BIB with QCD connector
1. Open the door and lift the cover of the machine.
2. Switch the machine off at the on/off switch.
3. Open the QCD connector by pulling the inner part with the hose

connectors to the outside. The connector is fully opened when the
word “OUT” is visible on the inner part

(see paragraph 5.4.2)

.

4. Detach the QCD connector from the pump hose.
5. Lower the clamp securing the pump cup.
6. Take the pump cup with hose out of the housing.
7. Clean the hose in the pump cup, the non-drip spout and the QCD

connector with hot water.

8. Clean the rotor assembly with a damp cloth.
9. Put the pump cup back in place.
10.Move the clamp over the pump cup.

☞

Make sure the pump cup is properly in place. Incorrect
assembly may cause incorrect dosing of product.

11.Reconnect the QCD connector to the pump hose.
12.Slide the QCD connector on to the connector of the BIB.
13.Assemble the QCD connector by pushing in the inner section with

the hose connectors. The connector is fully home when the marker
on the hose connectors and the outer section of the QCD connector
are directly opposite one another .

14.Switch the machine on at the on/off switch.

Figure 7-2

Placing the pump cup on the peristaltic pump

«
...
17
18
19
20
21
...
»

Содержание CALLISTO

























Отзывы:

Нет отзывов