17
16
INST
ALLA
TION
MAINTENANCE
Cleaning
Daily
Clean the ceramic hob after use. You can use,
for example, a little washing-up liquid in
water. Never clean the ceramic hob with an
abrasive cleaning material!
Weekly
Special maintenance products for ceramic
hobs, such as Collo Profi or Cerafix give the
ceramic hob a protective layer. Treat the hob
with these products also when obstinate
stains have been removed.
Stubborn stains
You can remove burnt-on stains, metal and
lime scale stains from the ceramic hob with
such special cleaning materials as Jif, Collo
Luneta or Stahlfix.
Remove stubborn stains with a glass scraper.
Boiled-over food residues
Remove boiled-over food residues with a
glass scraper. Molten plastic and sugar can
also be removed with a glass scraper.
Do not first allow the hob to cool completely.
Special maintenance products for ceramic
hobs (e.g. Collo Luneta) form an antistatic
layer on the hob so that it attracts dust less
readily.
Installation
Electrical connection
6000W - 230 V - 50 Hz
The power supply to the hob is via the oven or
the separate control panel. You can read how
to connect the appliances to each other in the
installation instructions for these appliances.
Assembly
Fit a wooden plate to protect the hob if the
hob is combined with a control panel
(see fig. 4).
Please note:
Do not fit a hob next to a cupboard or wall
made of flammable material above the
worktop. (If there is no alternative then keep
to a minimum distance of 40 mm between the
outer edge of the hob and this wall.
This appliance complies with the CE directives.
Keep a distance of at least 650 mm between
the hob and any extractor hood to be fitted.)
■
Mark out the cut out (560 x 490 mm) on the
worktop (see fig. 5).
560
490
580
510
42
fig. 5
min. 5
fig. 4
