7
For Support Contact +46 8 25 28 75, [email protected] or +61 2 9956 7377, [email protected]
3.2 View, Test & Upload
Explanation
•
Band 7 / 2600 Mhz
•
Referenced Signal Received Power (RSRP) is -82 dBm with Min & Max values below
•
Referenced Signal Received Quality (RSRQ) is -7dB with Min & Max values below
•
Public Land Mobile Network (PLMN) is 240007: The channel is 2850
•
Scanned Network (Operator)
Communication test
Ping to test network communication. Standard is set to
Google’s server. This can be change using the
configuration tool shown below.
Upload Signal
1.
Uploading a signal is made through pushing “Send Data to Server”. Make sure you have IP +
Port setup. You c
an easily add this by sending a SMS command seen above in “2.1 SMS
Commands”
2. Uploading signals continuously without pushing can be done through activating logging and
sending under settings.
Download Signal
If logging is turned on while sending is turned off, the logged scans will be stored on the device. They
can be downloaded using the configuration tool explained further down the manual
