Mounting Dimensions
DIN-Rail Mounting
The aluminum DIN-rail attachment
plate should already be fixed to the back
panel of the ETM-IES-08-U1-A Switch when
you take it out of the box. If you need to
the reattach DIN-rail attachment plate,
make sure the stiff metal spring is situated
towards the top, as shown in the figures below.
To remove the switch from the DIN-rail, simply reverse Steps 1 and 2
above.
Wall Mounting (optional)
For some applications, you will find it convenient to mount the switch on the
wall, as illustrated below.
STEP 1:
Remove the aluminum DIN-rail
attachment plate from the
switch
’s rear panel, and then
attach the wall mount plates,
as shown in the diagram
below.
STEP 2:
Mounting the switch on the wall requires 4 screws.
STEP 2:
The DIN-rail attachment unit
will snap into place as shown
below.
STEP 1:
Insert the top of the DIN-rail
into the slot just below the stiff
metal spring.
4
