1. Attach spider plate / crossbar to junction box, use screws if needed.
2. Feed AC supply wire through canopy center hole.
3. Assemble canopy onto aluminum housing with screws (supplied) and make proper wire connections.
3.1 Black Wire (L); White Wire (N);
1. Attach spider plate / crossbar to junction box, use screws if needed.
2. Remove the opposite mounting end cap and knock out of the holes on the cap for pulling through
wires and assembly screws.
3. Pull out all AC supply wires and feed wires through the holes of end cap (first) and then canopy.
SAVE THESE INSTRUCTIONS - READ ALL INSTRUCTIONS CAREFULLY
INSTALLATION MANUAL FOR EE202WH-A13BB-GU / LED RUNNING MAN EDGE LIT EXIT SIGN
Head Office -
1850 Wilson Ave. · Toronto, ON · M9M 1A1 ·
Tel:
416.741.7336 ·
Fax:
416.741.9104 ·
Toll Free:
in Canada. 1.800.661.9610 · in USA. 1.888.762.5384 (SOCKETS4U)
www.etlin-daniels.com· For sales/service questions - [email protected]
4. Use screws (supplied) to tighten canopy to mounting plate (spider plate/cross bar)
5. The unit can be installed on any surface, you may rotate the Acrylic panel in any angle from
0 degrees to 180 degrees.
1. Refer to assembly drawing before you start installation.
2. Position metal housing and bar hangers between joists. Make sure bar hangers are
oriented in the correct position.
junction box
junction box
crossbar
canopy
housing
end cap
opposite mounting end cap
canopy
housing
crossbar
traverse
SURFACE WALL MOUNT
WALL SIDE MOUNT
RECESSED MOUNT
4. Assemble canopy and end cap to metal bracket with screws (supplied) and make proper wire connections.
5. Using screws (supplied) tighten canopy to spider plate (crossbar).
6. The unit can be installed on any surface, you may rotate the Acrylic panel in any angle from
0 degree to 180 degree.
3. Adjust height of metal housing vertically using adjusting slots and tightening all scres on adjusting slots
and bar hanger bracket to secure adjusting bracket and bar hanger.
4. Make proper electrical connections at junction box in the ceiling.
5. Secure trim plate by using provided screws.
