ETL SecureLogic 20700, Руководство пользователя

Страница: 18 / 20

TROUBLE SHOOTING
Problem
Upon pulling it out of the box,
electronics do not work.
Power/touchpad are operational, but
door does not drop.
Door opens very slowly, or only
partially.
I forgot my Pin number.
System continues to register an
invalid fingerprint, although
nothing is pressed on the sensor.
Possible Solution
1. Charge battery for 12 hours.
2. If charging the battery does not
activate electronic panel, call
Customer Service.
1. Open Wall Vault™ door with
Emergency Access Key (see
Operating Instructions).
2. Gently pull door downward with
key turned to the right.
3. Be sure slide rails and door are
free from obstruction before
re-closing.
1. Gently pull door downward until
door is in the full open position.
2. Be sure slide rails and door are
free from obstructions.
3. Slightly oil bearings with silicone
based spray. Do not lubricate
bearings more than once per year.
1. Open vault with Emergency Access
Key (see Operating Instructions).
2. Change pin number (See
Programming Instructions)
Model 20700 Only
2. Perform Master Reset to clear
system and return to default
settings (see Operating Instructions).
1. Sensor is dirty or has accumulated
moisture - refer to maintenance
instructions.
17
3.ai 2/14/2005 11:07:38 AM