eTIGER secual box, Руководство пользователя

Страница: 35 / 45

Presentation Setup Daily use Settings Accessories Precautions
Accessories
35
LED indications
Blinks continuously: self-testing
Blinks once: an intruder is detected
Blinks twice: self-testing is complete; entering working mode
Blinks once every 3 seconds: the batteries must be replaced. (You will be informed
by SMS when the batteries are low if the motion detector is registered in the control
panel.)
Connection to your alarm system
The detectors in your kit are already connected and ready to use.
If you have deleted the detector from the control panel, you can reconnect it as
follows:
1. Press once on the Connection button
3
of the control panel.
2. Press the Test button at the back of the detector. The control panel beeps once,
the detector is now connected. If your control beeps twice, the detector was
already connected.
Specifications
Power supply
DC 3V (AA 1.5V LR6 Batteries x 2)
Static current
≤ 30 uA
Alarm current
≤ 15 mA
Detection scope
8 m / 110°
Transmission distance
≤ 80 m (in open area)
Radio-frequency
433 MHz (±75 KHz)
Housing material
ABS plastic
Operating conditions
Temparature: -10°C~55°C
Relative humidity: ≤ 80% (non-
condensing)
Dimensions (L x W x H)
Detector: 107 x 53 x 32 mm
Bracket: 52 x 30 x 26.5 mm