SETUP
DOC_DEV_XS_Setup guide_C
page 63
16.6
Unitelway gateway
The Unitelway gateway is used to connect a Unitelway
master PLC to an IP network.
In particular it is used to perform the remote maintenance
of a Schneider Electric RS485 PLCs via an IP network.
To configure the gateway :
•
In the menu, choose
Setup > IP-RS gateways > Unitelway
•
Tick the
Enable
checkbox.
•
Configure the following parameters.
COM port
Select the serial link 1 or 2 of the product.
Bitrate, Parity, Data, stop bits
Allow to set the bitrate and the format of the asynchronous serial link..
Xway address
Gateway address in the Xway network.
TCP idle Timeout
Set the time the gateway will wait before disconnecting the TCP link if no characters are detected.
Unitelway slaves
Mapping between the address of each Unitelway slave emulated by the gateway and the IP and XWAY
addresses of the device on Ethernet.
Содержание XLAN+ Series
Страница 6: ......
Страница 49: ...SETUP DOC_DEV_XS_Setup guide_C page 49 ...
Страница 74: ......
Страница 82: ......