HAA52N
V. 03
–
08/06/2020
37
©Velleman nv
TAMP
NC
Se for necessário um interruptor antisabotagem, ligue estes
terminais a uma zona de proteção 24-horas no painel de controlo
do alarme. O contacto do interruptor antisabotagem é um
contacto NC se a tampa frontal do detector estiver fixada à caixa
Uma eventual abertura da tampa frontal pode tornar o contacto
aberto em qualquer altura e enviar um sinal de alarme imediato
para o painel de controlo.
4.2
Definiçoes Jumper
LED
ON
Ativa o LED
ON = alarme ativo.
FLASH (piscar) = ativação
DESLIGADO
Desativa o LED. Não afeta a detecção.
MODO
DESLIGADO
Desativa o LED. Não afeta a detecção.
S
Procesamento do sinal de polaridade alternada
standard. Para funcionamento num ambiente
estável.
P
Duplo processamento do sinal de polaridade
alternada a cada 10 segundos. Para ambientes
instáveis.
ALARM
NF
O contacto de relé de saída do alarme é NC
(normalmente fechado) O relé de saída está
normalmente ativo.
NO
O contacto de relé de saída do alarme NO
(normalmente aberto) O relé de saída está
normalmente inativo.
5.
Utilização
5.1
Local de Montagem
•
O detector pode ser montado à superfície ou num canto, ou
usando o suporte giratório fornecido. Monte sempre a
unidade numa superfície resistente.
•
O detector deve ser montado no interior, em áreas onde não
existam aberturas constantemente exposta ao ambiente
exterior.
•
Escolha o local de montagem de modo a que o movimento
inesperado de um instruso atravesse o feixe de detecção.