5
A S S E m B ly A n D o p E r A t i n g i n S t r u C t i o n S | e n E x H o - i C - F i r E D E t E C t o r S
With your choice of ETHERMA you have decided on an inge-
nious heating solution. We thank you for your confidence. In
us you have a competent partner with more than 30 years of
experience. ETHERMA relies on constant innovation , highest
product quality and modern design.
We support you with comprehensive personalized services and
find the right product solution for you.
The following instructions will help you, to use your ETHERMA
quality product as effective as possible. They contain important
information about safety, installation, use and maintenance of
the devices. Please read the information in this instruction
carefully and keep them for feedback at a later time on.
G E N E R A L I N F O R M A T I O N
S p E C i F i C A t i o n S
Standby consumption: . . . . . . . . . . . . . . . . . . . . . . . . . . <0,5 mW
Consumption in alarm mode: . . . . . . . . . . . . . . . . . . . . . .<0,6 W
Emission band: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 868MHz
Internal power supply: . . . . . . . . . . . . . . . . . . . . . 9-volt battery
External power supply: . . . . . . . . . . . . . . . . . . . . . . . . 12 V (DC)
Head of detector: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A2S type
Magnetic test | Double LED alarm indicator | Pulse LED
This system has been carefully designed to be as effective
as possible. There are some occasions, however, on which it
cannot provide accurate detection. The operation of any kind
of alarm system can be intentionally impeded or fail for other
reasons, such as the following:
› Improper installation. A security system must be properly in-
stalled to provide appropriate protection. This device should
not be placed in locations where it could be exposed to hu-
midity or liquid from water sprinklers. Each installation must
be evaluated to ensure that all areas are covered.
› It is very important that the security system is serviced peri-
odically to ensure that it is in proper working order and parts
must be updated or replaced if they are not providing the ex-
pected protection.
› Power cuts. eNEXHO-IC requires an appropriate energy sup-
ply for proper operation. If the device is working on batteries,
it is possible that they will fail. Even if the batteries do not fail,
please make sure that they are in good condition and are in-
stalled properly. If the device is running on an external power
supply, any outage, even of short duration, will interrupt the
operation during the power cut. Power cuts of any duration
are often accompanied by voltage fluctuations which can da
-
mage the device. Following a power outage, please perform
a complete check of the system to ensure that it is working
properly.
› Discharged batteries. The lifetime of a battery depends on
the environment in which it is found and on the number of
activations of the device. Environmental conditions such as
excessive humidity, high or low temperatures or abrupt tem-
perature changes can reduce the lifetime of the battery. Re-
gular inspections and maintenance will keep the system in
good operational condition.
› Sound alarm devices may not be heard by hearing-impaired
people.
› Phone line. The phone line could be out of order or busy for
a while. An intruder may also attempt to sabotage it by me-
ans of sophisticated methods. This practice is very difficult
to detect.
›
Insufficient time. In some circumstances, even if the device
is working properly, it is possible that response measures
are not taken in time to protect the occupants or their be-
longings.
› Malfunction of a component. Despite utmost efforts to pro-
duce the most reliable system possible, it could fail on the
grounds of the malfunction of a component.
› Inadequate inspections. Most of the problems which cause
malfunctions in a system can be detected by performing re-
gular checks and maintenance. The whole system should be
tested on a weekly basis and immediately after any intrusion
or intrusion attempt, fire, storm, earthquake, accident or any
kind of building works.
› Security and insurance. Despite all its advantages, an alarm
system is not a substitute for home or life insurance. An
alarm system does not exempt the user from taking precau-
tions regarding prevention and minimisation of damages in
an emergency situation.
W A r n i n g
Assembly and operating instructions
› Please read these instructions carefully and keep them for future consultation. eNEXHO range equipment must be installed
by an accredited, qualified electrician and must observe Low Voltage Regulations. The installation as a whole should meet the
provisions of aforesaid regulation. Any claim presented will be deemed invalid if the prevailing regulations have not been met.
eNEXHO-IC
Fire detectors
