Etesia MBHE2, Оригинальное руководство пользователя

Страница: 25 / 38

25
• To make collection of the grass easier after mowing, create two or
three larger piles of grass rather than several smaller ones.
• Because emptying the box is so quick and easy, there is no need to
fill it completely. Empty the box, even if it is not completely full,
whenever you come to an existing pile of grass.
• This will save unnecessary journeys.
7•9•2 MOWING WITHOUT COLLECTING:
MODEL MKM
• Look at the mown area: there should be no cut grass left on the
surface. If cut grass can be seen, the cutting height should be raised
until the desired result is obtained.
Advice for mulching
• It is better to mulch the grass when it is dry. Mowing wet or damp
grass increases the amount of debris accumulated in the housing,
results in clumping and requires more power.
• Keep the blade housing clean. Accumulated debris under the hou-
sing reduces the shredding efficiency.
• Only mow one third of the height of the grass at a time. Mow more
than once if the grass is tall or wet.
• Do not mow the same area more than once:
- allow a greater overlap of cutting.
- adjust the speed according to the condition of the grass.
- the blades must be in perfect condition. Check them and sharpen
them frequently.
7•9•3 HIGH GRASS MOWING
Always stop the engine and take the key out of the ignition
before modifying the open or closed deflector mowing
mode. Choose the mowing mode before beginning to mow.
STANDARD FEATURE ON MKM AND OPTION (MD80)
ON OTHER MODELS
• For mowing exceptionally high grass, a cutting deck lateral ejection
device improves the efficiency of your mower.
• Use of grass box as deflector:
- For mowing without picking up the grass, the bottom of the grass
box can be removed. To unclip the bottom of the grass box, bring it
to the dumping position (see picture 7a).
MODEL MKM
• When mowing tall grass, use the lateral ejection device built into
the cutting deck. This improves the efficiency of your mower.
Opening/closing the deflector:
• Undo the lateral deflector clasp on the right of the cutting deck. The
deflector is deployed automatically outwards by a spring, and the
protective flap is positioned in front of the lateral ejection outlet
(see picture 7b).
• Check that the protective flap is in position and in good condition.
Do not use your mower in the lateral ejection configuration if the
protective flap is faulty.
• To return to the mulching configuration, push the lateral deflector
towards the cutting deck, hook the clasp in its bracket and close it
again.
7•10 DRIVING ON SLOPING GROUND
• The machine is suitable for use only on ground with a gradient of
less than 17,6 % (10°) (see picture 8).
• To ensure maximum safety when driving on slopes, follow the
instructions below:
- Avoid sudden starts.
- Always drive at low speed so as not to lose control of the mower.
- When moving off on a slope [uphill or downhill start], release the
parking brake and move forward immediately using the control
pedals.
- Particular care should be taken when performing U-turns on
sloping ground. Prepare for the change of direction and reduce
speed so as not to lose control of the mower.
- Apply the parking brake as soon as the mower stops.
7•11 SPECIAL EQUIPMENTS FOR
DIFFERENT MODELS
7•11•1 LIGHTING (MKHP)
In order to see and to be seen, your mower is fitted with front lights.
Please switch the lighting control switch on.
7•11•2 BUZZER (MKHP)
In order to signal a danger you can use a buzzer. Please switch the buzzer
control on.
CAUTION !
In spite of this equipment, you are not allowed to
drive on public roads with your machine.
7•11•3 HOUR METRE (MKHP)
To make the maintenance of your machine easier, the hour metre will
remind you through messages when your oil needs to be emptied
(after 10 first hours and then every 100 hours).
• The message will appear one hour before due time and will stay
during on the screen two working hours. After two hours it will
automatically disappear.
• In normal time when the engine is on the screen will show you the
engine running and when the engine is off the total number of hours
done.
7• OPERATING INSTRUCTIONS