Etesia ET MOWER ETM105, Оригинальное руководство пользователя

Страница: 37 / 56

37
8• TROUBLESHOOTING
PROBLEMS SITUATION SOLUTION
Machine Alarm Indication:
"No wire signal"
The LED at the back of the station is not switched on.
The station is unplugged.
Plug it in.
Wait for the network power to go back on.
The LED at the back of the station is flashing red.
There is a break in the wire.
Call the dealer to come and repair it.
The LED at the back of the station is flashing green.
The problem could be coming from the robot or from
the ground.
Contact your dealer.
If necessary consult your dealer.
Machine Alarm Indication:
"Stuck on wire"
The machine is stuck between several constraints.
Remove the objects obstructing the passage and the
operations.
The machine has several force field actions, check
that there are no metal objects in or on the ground.
If necessary consult your dealer.
Machine Alarm Indication:
"No wayout path"
The machine is stuck in a narrow passage and detects
all the sides of the field of its peripheral wire.
Remove the objects obstructing the passage and the
manœuvres.
The machine has several force field actions, check
that there are no metal objects in or on the ground.
If necessary consult your dealer.
Machine Alarm Indication:
"Supply outage"
The machine was plugged into its station and has been
disconnected from it.
Check that the charging contacts of the station and
the machine have not been oxidized.
Check that the station has not been set up on a slope.
Warning: if you have placed the machine to charge manually, it will not go ahead. To solve the problem, see
point § "The machine stays at its station for a long time and does not leave it again".
If necessary consult your dealer.
Machine Alarm Indication:
"No station found"
The machine carries out its manœuvres to enter the
station but stops before or after its station.
The sonar machine or station is faulty: contact your
dealer.
The option Multi Robot has been chosen: see 4•9•1to
untick it.
The number of metres of peripheral wire encoded
in the machine is less than the reality: contact your
dealer.
The set up of the charging station was not done in a
suitable place: contact your dealer.
If necessary consult your dealer.
Machine Alarm Indication:
"Charge contact ?"
The machine enters the station normally but the contact
is not made properly with the latter so it continues and
stops a little further along.
Check that the charging contacts of the station and
the machine have not been oxidized.
Check that the distance between the peripheral wire
and the station is at least 65 cm.
Check the height of the contacts of the charging
station in comparison with those on the side of the
machine.
If necessary consult your dealer.