Eterra MIX-N-GO BMX-100, Руководство пользователя

Страница: 23 / 41

MIX-N-GO - User Manual Rev 5.2
Page 23 of 41
Connect the hooks to the sides of spout A to the special pins on the bucket body, near the
lateral discharge hole. Operate the special handle B to open and close the discharge gate.
DANGER:
Do not stand under the bucket while securing the discharge spout and while discharging the
mix.
(Fig 26) Unloading through the discharge spout of the lateral discharge hole
DANGER:
Before connecting the spout, make sure the machine is parked in a stable position and no one can operate the
controls.
DANGER:
The discharge spout shall be connected by a second operator who shall keep at a safe distance and start
connection only once the machine has been parked and the parking brake or other parking device has been
engaged. To install the discharge spout, obey the following instructions:
Machine Operator:
•
Raise the bucket 4 feet above the ground.
•
Stop the engine and ensure no one can operate the machine controls.
Operator on the ground:
If the load is suspended, place two supports to the sides of the bucket or install the spout with the bucket resting
on some supports on the ground. Connect the hooks to the sides of spout A to the special pins on the bucket
body, near the lateral discharge hole.