T&P Valve and Exhaust Collar Installation
Loosen 2 screws holding the Front Panel at the
bottom, push the panel down and towards yourself
to remove. Take the accessory box out of the front
of the unit. This box contains:
T&P Relief Valve x 1
Exhaust Collar x 1
O Ring (G95) x 1
Mesh Screen x 1
Drain Cap x 1
Self Tapping Screw (T4x16) x 5
Attach the Front Panel and push the panel up.
Secure with the previously removed screws.
Prior to installing the Exhaust Collar, please
secure the O-Ring between the Exhaust Flange
and botton of Exhaust Collar with T4 screws.
1.
14
2.
3.
