7
(1) Alpha-numeric display (2) Touch switches
(3) Microphone (4) DMX-In socket
(5) DMX-Out socket (6) Power switch
(7) Battery switch (8) GND
(9) Power socket and fuse holder (10) Fixation screw
(11) Mounting bracket
There are two buttons on the rear panel of the lighting. One is for power, and the other is
for battery.
●
When use the fixture with DMX, not battery, please switch the button for power to “on”,
and switch the button for battery to
“bat off”.
●
When use the fixture with battery instead of DMX, please switch the button for power to
“off”, and also switch the button for battery to “bat on”.
●
When charge the light, please switch the button for battery to
“charge”. At the same
time, if the switch for power is
“on”, the light will be at work during the process of charge,
but will consume some power from the charge; if the switch for power is
“off”, the light
will be blackout and not be at work.
Tip for the battery and charge:
●
The battery can last for 6 hours when all LEDs on after full charge , and can last for
more than 10 hours on auto running mode. Up to 20 Hours with one color diode on.
Results will vary based on brightness of LEDs
●
It is suggested to charge the battery for at least 8 hours, which will extend the life span
of the battery.
●
At the bottom of the fixture, there is a little hole which is the indicating light for the
charge. When charge the light, the indicating light will be in red, and when charged full,
it will be in green.
