11
use different ID value if you need use more than 1 group wireless net at same
time in same place.
3.
The red LED flashes when transmitter transmits DMX data by no interfered
frequency section, then receiver changes communicated frequency section.
Green LED flash till received corrected same ID value, LED flash more fast once
DMX data more fast.
4.
Communication was established correctly then
Cleaning
Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must
be carried out periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the outside casing.
2. Clean the external optics with glass cleaner and a soft cloth every 20 days.
3. Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke,
fog residue, dust, dew).
Trouble Shooting
Listed below are a few common problems the user may encounter, with solutions.
Unit does not respond to DMX:
1. Check that the DMX cables are connected
properly and are wired correctly (pin 3 is “hot”;
on some
other DMX devices pin 2 may be „hot‟). Also, check that all cables are connected to
the right connectors; it does matter which way the inputs and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit. If problems are not resolved,
contact your dealer for service.
Specifications
Model: CUBE4
™
RGBW QUAD LED
Working Position: Any safe working position
Power Supply: Switching power supply
Voltage: AC 100-220V /50~60Hz
Power Consumption: 40W
Colors: RGBW Color Mixing
