ETENON Fitness PTT0220, Руководство пользователя

Страница: 4 / 11

Fitting Instructions
1 When strip off the wrappage around the surface of equipment should be careful do
not hurt the machine with knife scratches on the surface
2 When moving this equipment a sufficient number of personnel should be used to
prevent the equipment from collision or to avoid the injuries caused by personnel
shortage
3 Prior to installation of the equipment make sure that all the parts are complete no
missing hardware
4 When install the equipment should have two or more persons working together to
ensure the accurate location of parts assembly
5 When install the equipment should pay attention to the assembly instructions to
prevent component fitting to a wrong place or some components being omitted
6 The suitable installation tools should be used to avoid the equipment damages or
human injuries caused by the use of inappropriate tools in the installation process
7. If need to move equipment the movement must be after the completion of
installation The equipment can not be moved when the installation process hasn’t
finished or locking nut hasn’t been tightened up.
8. Attention should be paid to the sequence of fastening locking nut when the overall
installation of the equipment is not finished should not tighten up the nut that is
being installed After the whole machine is properly fitted together the locking nuts
can be tightened up one by one.
10. After the completion of installation start the initial trial of the equipment with gentle
force Make certain that the equipment is without any abnormity before normally use
the machine If something unusual is found with the equipment that it is necessary
. , ,
.
. ,
,
.
. , ,
.
. ,
.
.
.
.
.
,
.
,
,
. ,
,
.
. ,
4