ETEKCITY MSR-A600, Руководство пользователя

Страница: 18 / 28

18
Replacing the Fuses
1. Disconnect the test leads from the
multimeter and turn the rotary switch to
.
2. Carefully remove the rubber case from the
multimeter.
3. Use a small screwdriver to remove the
screws at the bottom of the multimeter.
Once the screws are removed, carefully
separate the front and rear panels.
4. Replace the fuse(s) that need to be
changed. [
Figure 6.1
]
WARNING
To avoid electrical shock, arc blasts, arc
flashes, personal injury, or damage to
the multimeter, use the specified fuses
ONLY in accordance with the following
procedure.
Figures 6.1
5. Reconnect the front and back panels, then
replace the screws to secure the panels
together. Place the protective case back
onto the multimeter.
Note:
Make sure the fuses are placed in the
correct ports.