409-35011
Rev D
27
of 83
Table 4: Tooling specifications
Cable size
mm² [AWG]
Outer
diameter
mm
Core
diameter
mm
Manual
override
mm
Conductor
diameter
mm
Mandrel
Contour
blade kit
(3 blades)
Cutting
wheel kit
(3 wheels)
10 [8]
8.8 (-0.6)
6.0 (-0.6)
-
4.5
2360456-1
2364113-1
2364114-1
16 [6]
10.2 (-0.6)
7.2 (-0.6)
-
5.8
2360456-2
2364113-2
25 [4]
12.2 (-0.6)
8.8 (-0.6)
-
7.2
2360456-3
2364113-3
35 [2]
14.4 (-0.6)
10.5 (-0.7)
-
8.5
2360456-4
2364113-4
50 [1]
15.8 (-0.6)
12.1 (-0.7)
12.09 - 12.20
10.5
2360456-5
2364113-5
60 [0]
16.9 (-0.6)
13.0 (-1.2)
12.99 - 13.30
11.6
2360456-6
2364113-6
70 [00]
18.2 (-0.8)
14.4 (-1.4)
-
12.5
2360456-7
2364113-7
95 [000]
20.9 (-0.8)
17.2 (-1.4)
-
14.8
2360456-8
2364113-8
120 [0000]
23.0 (-0.8)
19.0 (-1.4)
-
16.5
2360456-9
2364113-9
NOTE
Table 4 lists the correct tooling needed for each cable size. The manual override column only applies to two of these sizes.
Due to variances in cable brands, some cable sizes have overlapping core diameters. In these cases, the operator must select
the appropriate tooling. The manual override column shows the possible overlapping ranges.
