-3-
II Electrical Signs
Extremely dangerous! Operators shall strictly observe safety rules; otherwise there
would be dangers of electric shock to cause personal injuries or casualties.
Dangerous
！
Operators shall strictly observe safety rules; otherwise there would be
dangers of electric shock to cause personal injuries or casualties.
Warning! Operators shall strictly observe safety rules; otherwise personal injuries or
equipment damages might be caused.
Double insulation
AC
DC
Tech
Ⅲ
nical Specifications
Function
Measurement of AC/DC current, leakage current
Power Supply
Zn-Mn dry battery,6F22,9V
Test Mode
Clip-on CT, integral mode
Clamp Size
φ
7mm
Measurement Range
0mA-60.0A AC/DC
Resolution
1mA AC/DC
Accuracy
±
2%rdg
±
5dgt (23
℃
±
5
℃
, below 75%rh)
Display Mode
Four digits LCD display
Dimension
LWH: 168mm
×
65mm
×
34mm
LCD Dimension
35mm
×
21.5mm; display domain: 32mm
×
15mm
Sampling Rate
2 times/s
Frequency
AC: 45Hz-400Hz
Polarity Indication
DC current auto identified and display
“
—
”
Test Position
Tested wire in the jaw center
Range Shift
Automatically
Line Voltage
AC600V
RS232 Interface
Data stored in the memory of the meter via RS232 upload to PC
Com-Configure
Baud rate:9600, data bit:8, stop bit:1
Data Memory
99units, FULL blinks when the memory is full
Reading Hold
DH indicating the reading is hold
Out of Range
OL indicating the current is out of range
Auto Power-off
5 Minutes after power on, it will power off automatically to lower the
power consumption
Battery Voltage
Indicating the battery voltage is lower than 7.2V.Then the
battery have to be changed
Weight
180g
（
including the battery
）
Working Current
10mA
Consumption
10mW
Working Temperature
and Humidity
-10
℃
-50
,below 80%rh
℃
Limit Temperature
Error
-10
℃
-0
℃
and 40
℃
-50
℃
, within 2%rdg
Storage Temperature
and Humidity
-10
℃
-60
,below 70%rh
℃
Insulating Strength
AC2kV/rms (between the alloy of the clamp and the housing)
Applicable safety rules
IEC1010-1, IEC1010-2-032, Pollution level 2, CAT
Ⅲ
(600V)
Содержание 6000
Страница 1: ......