Etco IP-Mini, Инструкция по эксплуатации

Страница: 26 / 29

ETCO Incorporated, Tel: 401-467-2400 Fax: 401-467-9230 Web: www.etco.com
SYMPTOM CAUSE REMEDY
TERMINAL WILL NOT FEED PICK-UP POSITION INCORRECT. ADJUST.
FORWARD WHEN PRESS
IS CYCLED.
PIVOT SHEAR PIN BROKEN. REPLACE. SPARES ARE
LOCATED ON TOP OF
APPLICATOR.
MISSING CAM ROLLER. REPLACE.
FEED FINGER ADJUSTMENT TIGHTEN.
SCREW LOOSE.
BROKEN FEED FINGER SPRING. REPLACE.
TERMINAL OVER FEEDS FEED SETTING INCORRECT. ADJUST.
WHEN PRESS IS CYCLED.
BRAKE LEVER IN OFF SWING LEVER DOWN TO
POSITION. ON POSITION.
BRAKE TENSION SET TOO LIGHT. TURN CLOCKWISE TO
INCREASE PRESSURE.
FEED FINGER PICKUP LOCATION ADJUST.
INCORRECT.
TERMINAL UNDER FEEDS FEED SETTING INCORRECT. ADJUST.
WHEN PRESS IS CYCLED.
INCORRECT CAM INSTALLED. SEE SECTION 5, BACK
POCKET FOR PROPER CAM.
BRAKE TENSION SET TOO HEAVY. TURN COUNTERCLOCKWISE
TO DECREASE PRESSURE.
FEED FINGER PICKUP LOCATION ADJUST.
INCORRECT.
TERMINAL TANGLED ON REEL. CONTACT ETCO QUALITY
CONTROL DEPARTMENT.
INTERMITTENT FEED CHANGES. BRAKE LEVER IN OFF POSITION. SWING LEVER DOWN TO
ON POSITION.
DEBRIS UNDER BRAKE. REMOVE STRIP FROM FEED
TRACK AND CLEAN.
FEED ARM PIVOT PINS LOOSE. TIGHTEN SET SCREWS.
SECTION 4
TROUBLESHOOTING GUIDE
ETCO IP MINI REAR FEED APPLICATOR – page 3
4