ETC Source 4WRD II, Инструкция по установке и эксплуатации

Страница: 10 / 28

6 Source 4WRD II Installation and User Manual
Retrofit the Fixture
WARNING:
RISK OF FIRE OR ELECTRIC SHOCK! Installing the
Source 4WRD II LED retrofit kit requires knowledge of
luminaire electrical systems. If you are not qualified, do not
attempt installation. Contact a qualified electrician.
Note:
THE RETROFIT KIT IS ACCEPTABLE AS A COMPONENT OF A
LUMINAIRE WHERE THE SUITABILITY OF THE COMBINATION SHALL
BE DETERMINED BY AUTHORITIES HAVING JURISDICTION.
Retrofit kit
LEDs
RJ45 data in
and data thru
User interface and
navigation buttons
Wire the Power Connector
If you ordered a Source 4WRD II retrofit without a power connector, wire
the connector in accordance with all national and local electrical codes:
•
Brown = Live
•
Blue = Neutral
•
Green/Yellow = Protective earth