6 - 20
MicroVision FX
Analog inputs
Analog inputs are analog control signals that originate from external
sources.
MicroVision FX accepts input from 32, 64 or 96 analog inputs,
depending on your console's configuration.
Analog inputs enable you to incorporate output from analog sources into
your console. If you have enabled the analog outputs option, the output
levels of channels1 through 32, 64 or 96 will be affected by the output
levels of the analog inputs. You cannot assign analog inputs to other
channels.
Analog inputs have a pile-on effect on channel output levels. Channel
output level is determined by either the output of the console, or the
analog readback, whichever is higher. If you are using a color monitor,
channels levels determined by analog inputs are displayed in white.
Note: To accept analog inputs, your MicroVision FX must be modified by
ETC at the factory.
Follow these steps to enable/disable analog inputs:
1.
Press [Set Up].
2.
Press [9],
Options
.
3.
Press [3],
Analog readbacks
.
4.
Enter 1 to enable 32 analog inputs, 2 to enable 64, 3 to enable 96, or
4 to disable analog inputs.
5.
Press [Enter].
