ETC Hammerhead HG12, Руководство оператора и по техническому обслуживанию

Страница: 61 / 108

HG12 Winch Preparing the Winch and Work Area 45-11
Step 8: Once the desired depth is reached, remove pin in latch and lock latch
into the mast. Reinstall the pin to lock the mast in place.
NOTE: For deeper installation lower the bottom telescopic section first, lock in
place, then proceed to the middle section and so on. Each section of the telescopic
mast has stops on it to prevent the sections from coming completely apart
during setup.
Step 9: Use the outriggers if necessary to fine tune the bottom of the sheave of the
lower unit up or down to the centerline of the existing utility.
WARNING: Do not disconnect the cable eye from the mast until all sections of the
mast have been locked and secured in place.
Step 10: Remove the pin ( 12 ) securing the lower unit’s legs in the up position. Fold
the legs down and reinstall the pins to lock the legs in the down position.
12