ETC EchoTouch, Руководство пользователя

Страница: 7 / 44

EchoTouch Overview 3
EchoTouch Overview
EchoTouch is an all-in-one flush or surface mounted touchscreen that provides control of up to 16 Echo Zones
and connectivity with other Echo control and output products.
EchoTouch provides local control of a full universe of DMX and sACN or Art-Net outputs. It is also an RDM con-
troller for compatible and enabled devices.
Zones
A zone is used by EchoTouch to control fixtures. EchoTouch can control up to 40 zones. There are four types of
zones: an Echo Zone, a dimmer, a group of dimmers, a device, for example a color changing or moving light
fixture.
Zones need to be configured in patch for there to be output.
Note:
Echo Zones are not patched to a DMX value, instead they communicate over EchoConnect
to other Echo devices.Only the first 16 zones can be Echo Zones.
Working with Dimmers / Intensity
You can use the touchscreen and select zones directly on the zone map . The wheel can then be used to assign
an intensity level.
Zones can be controlled by zone faders, presets , and sequences on the pages .
Selected Zones
To make changes to zone values, a zone must be selected. Selection is indicated by a thick green border
around the zone cell on the Zone Map. Selection can happen in a number of ways:
Touch the zone cell on the Zone Map. Touch the cell again to deselect it.
Touch the color chip at the top of a zone fader. Touch the chip again to deselect.
To deselect all selected zones, use Clear>Selection .
Zone Map
The Zone Map button (located in the Page button menu) displays a topographical map of zones fullscreen at
maximum size. You may select zones on the topographical map for control.