ETC ECHOFLEX Wireless TimeClock Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 36

ETC ECHOFLEX Wireless TimeClock Скачать руководство пользователя страница 9

Wireless TimeClock Configuration Guide

4

Installation

Prepare

To ensure optimal function, consider the installation environment and the
following guidelines:

• For indoor use only. Operating temperature 0°C to 40°C

(32°F to 104°F), 5%–95% relative humidity (non-condensing).

• High density construction materials and large metal appliances or

fixtures in the space may disrupt wireless reception.

• Install the WTC within range of linked lighting controllers, 24 m (80 ft)

unobstructed view. Consider adding a repeater to extend the wireless
signal, if required.

• External antenna options include extension cables and a magnet-mount

antenna for installation locations with poor wireless reception.

• Can be surface-mounted or flush-mounted in an industry standard

two-gang electrical box (not provided). The box must be installed plumb
and square. Ensure it is clean and free of obstructions to accommodate
the cable if using an external antenna.

• Provide a 24 V power supply connection to the target two-gang

electrical box.

• Pull the plastic tab to activate the installed CR2032 battery. The battery

is not required to run the WTC, it is only used to maintain the time in
case of a power outage.

Note:

Installation must follow all national and local codes for
electrical equipment.

Note:

An External Antenna Extension Kit is sold separately
through Echoflex, part number 8186K1001. Contact
Echoflex for more information.

«
...
7
8
9
10
11
...
»

Содержание ECHOFLEX Wireless TimeClock





































Отзывы:

Нет отзывов