ETC Echoflex ELED3, Руководство по настройке, Страница: 5 / 24

Introduction 1
Introduction
The Tri-Zone Dimming Controller is a fully configurable and complete stand-alone dimming
and lighting controller designed to perform common lighting control applications based on
input from wireless linked sensors and switches.
High voltage
model shown
It includes 0–10 volt dimming channels for three individual
dimming zones and a robust 20 A relay (16 A relay in
ELED3H model) for ON/OFF control of large controlled
spaces.
Echoflex controllers include functionality to allow the
presetting of lighting scenes based on values for intensity
and color temperature. Presets can be activated from scene
stations, time clocks, or gateways. The lockout feature
allows time clocks to schedule a controller’s response to
specific sensors or stations.
The controller supports both open or closed loop photo
sensors assigning two channels as daylighting channels. The primary daylighting channel
includes a set point while the secondary channel uses an offset from the set point, both
configurable.
The primary daylighting channels set point can be configured based on the outdoor light in the
space. The secondary channel will lag the primary channel by the offset value, providing
consistent dimming results across the space as the natural light changes. The third dimming
channel can be controlled by linked occupancy sensors, switches or gateway commands.
This guides describes the features of the Echoflex Tri-Zone Dimming Controller models and
how to use and configure them.
Features
•
Three-zone control with 0–10 V dimming and relay switching
•
Configurable presets support lighting scenes
•
Accepts 120–277 VAC (regular model) or 240–347 VAC (“H” model) power input
•
Integrated daylight harvesting control on two channels
•
Occupancy based lighting controls with Partial- ON/OFF or manual ON, auto-OFF using
wireless occupancy sensors
•
Range Confirmation allows optimal placement of linked sensors
•
Pre-commissioning available when sold as a system through Echoflex
•
Central command support for Building Energy Management Systems (BEMS) gateway
control
•
Easy installation on electrical junction boxes with 1/2 in mounting nipple
•
Doubles as a message repeater
•
Energy code compliance including demand response, Partial-ON and Partial-OFF control
Note:
For information about Garibaldi Pro software or pre-commissioning services
that provide complete system solutions (linked and configured), contact Echoflex.
Garibaldi Pro software is available for download from the Echoflex website at
echoflexsolutions.com .