ETC Echoflex ELED3, Руководство по настройке, Страница: 18 / 24

14 Tri-Zone Dimming Controller Configuration Guide
Blink Indications
The tables below describe the LED codes that identify linked devices and the LED indications
that describe linking activities. A different color LED identifies each channel. Red is for
Channel 1, Green is for Channel 2, and blue is for Channel 3.
Device Count Codes
The following codes provide a visible report of the devices that are linked to the controller. The
Power LED repeats a code of blinks that represent the type and number of linked devices. Long
blinks = type. Short blinks = count. If the controller does not have any linked devices, the
Power LED remains on solid.
Device Type Power LED Learn LED
Switches
1 long blink followed by short blinks
that count the switches
Off
Occupancy sensors *
2 long blinks followed by short blinks
that count the sensors
Off
Photo sensor †
(maximum of 1) 3 long blinks followed by short blink
that counts the sensor
Off
Gateways and TimeClocks
4 long blinks followed by short blinks
that count the devices
Off
Demand response
5 long blinks followed by short blinks
that count the devices
Off
Entry door sensors
6 long blinks followed by short blinks
that count the sensors
Off
Window sensors
7 long blinks followed by short blinks
that count the sensors
Off
Keycard switches
8 long blinks followed by short blinks
that count the switches
Off
* An occupancy sensor linked to any channel will appear to be linked to all three channels.
† A photo sensor linked to CH1 or CH2 will appear to be linked to both channels.
Linking Activities
Activity Power LED Learn LED Light Response
Link mode Blinking On solid Cycles ON and OFF
Store link ID On for 4 seconds, and then blinking On solid ON for 4 seconds, and then cycles
Clear link ID Off for 4 seconds, and then blinking On solid OFF for 4 seconds, and then cycles