Page 8
ELED2(H) Installation Guide
Set Point Input Channel 3 BLUE POWER LED Blink Codes
Factory Default
OFF
CCT sensor linked
1 long blinks
followed by short blinks counting sensors
(typical max 1)
Central Command
2 long blinks
followed by short blinks counting sensor
Operating Mode and LED Activity
Mode
LEARN LED:
Red-CH1; Green-CH2;
Blue-setpoint
POWER LED:
Red-CH1; Green-CH2;
Blue-setpoint
Relay/Light
link mode
ON
toggle
toggle
storing ID
ON
ON 4 seconds
ON 4 seconds
clearing ID
ON
OFF 4 seconds
OFF 4 seconds
factory default Off
(flash on power up)
ON solid
ON
Listings & Regulatory Statements
UL Listed Component
Certified UL Standard 924
Certified UL Standard 60730
Certified CAN/CSA Std E60730
UL 2043 Plenum rated
California Energy Commission Title 24 - CEC
Washington State Energy Code - WSEC
ANSI / ASHRAE / IES Standard 90.1
International Energy Conservation Code - IECC
New York City Energy Conservation Code - NYCECC
FCC Part 15.231 Contains FCC ID: SZV-STM300U
IC RSS-210FCC Part 15.231 Contains FCC ID: SZV-STM300U
The enclosed device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(i.) this device may not cause harmful interference and
(ii.) this device must accept any interference received, including
interference that may cause undesired operation.
Echoflex Solutions
38924 Queens Way, Unit #1, Squamish, BC, V8B 0K8, Canada
n
+1 778-733-0111
echoflexsolutions.com
n
8DC-5872-2.1
n
Document Part # 8189M21-5872-1 Rev C
n
12/20
Copyright © 2019-2020 Echoflex Solutions, Inc.
Product information and specifications subject to change without notice.