ETC ColorSource Spot jr, Руководство по установке

Страница: 9 / 12

ETC Installation Guide
ColorSource Spot jr
Pre-configured Presets
Preset Name
1 3200 K White
2 5600 K White
3 Red
4 Green
5 Blue
6 Cyan
Preset Name
7 Magenta
8 Yellow
9 Orange
10 Light Yellow
11 Light Blue
12 Light Pink
Pre-configured Sequences
Sequence Name
1 Rainbow Fast
2 Rainbow Slow
3 Warm Colors Fast
4 Cool Colors Fast
5 Random
Re-record Presets
1. Using DMX, set the desired levels for the new preset.
2. Press the Mode button to access the Presets/Sequences menu.
3. Press the Up button or Down button to navigate to the preset number
that you want to re-record.
4. Press and hold the Mode button for 3 seconds to confirm the preset
selection. The user interface will show a 3-second countdown. The
preset number blinks once to confirm that the preset has been
recorded.
Note:
When the fixture is in Direct mode (
dir
) or 1-channel mode
(
1ch
), you cannot re-record presets.
When you re-record presets with the fixture in RGB mode (
rgb
), the
intensity is set to full and the strobe is turned off.
See
Change the DMX Control Mode on page 7 .
ColorSource Spot jr Page 9 of 12 ETC