ETC Installation Guide
ColorSource PAR Pearl v1.7
ColorSource PAR Pearl v1.7
Page 11 of 16
ETC
Adjusting the intensity of presets
1:
Ensure that DMX data is not present.
2:
Press the Mode button to access the Presets menu, and then press the
Up and Down buttons to select the preset that you want to edit.
3:
Press and hold the Mode button for 3 seconds. The display shows
: ## where the number is an intensity level from
, or
.
4:
Press the Up and Down buttons to change the intensity level of the
preset in real time.
5:
Press the Mode button to confirm your selection and return to the
Presets menu.
The display will automatically return to the Presets menu after 10 seconds of
inactivity, and edits to the preset intensity will not be saved.
Locking the user interface
After you have set up the fixture, you can lock the user interface to prevent
additional changes.
1:
Press and hold the Up and Down buttons simultaneously for 3
seconds. The display will show
to indicate that the user interface
is locked.
2:
To unlock the user interface, press and hold the Up and Down buttons
simultaneously for 3 seconds.
