ETC Installation Guide
ColorSource PAR Pearl v1.7
ColorSource PAR Pearl v1.7
Page 3 of 16
ETC
Environment
The ColorSource PAR Pearl operates in ambient temperatures of 0°C–40°C
and comes with a variable-speed fan.
Electrical
• Operates between 100V and 240VAC at a frequency of 50/60Hz.
• Maximum power consumption is 135W.
• Up to 9 luminaires (15A max) may be linked via power thru connector
(10 luminaires total per circuit) when used with an R20 Relay Module
or Unison Echo
®
Relay Panel. Consult breaker trip curves when used
with other equipment. Requires power from a non-dimmable source.
• Inrush:
- 120V: 35A (first half-cycle)
- 240V: 49A (first half-cycle)
Typical power consumption
Note:
The ColorSource PAR Pearl is for indoor use only.
Note:
• Maximum recommended ambient operating
temperature: Ta = 40°C (104°F)
• Maximum anticipated external surface temperature
at 40°C ambient: Tmax = 80°C (176°F)
• External temperatures after 5 minutes of full-
brightness operation at 25°C (77°F) ambient:
33°C (91°F)
• External Temperature (steady state achieved) at
25°C (77°F): 44°C (111°F)
100V
120V
230V
Idle Power/Current
1.7W/0.03A
1.6W/0.03A
1.47W/0.03A
Direct at Full/Current
116.6W/1.17A
114.4W/0.96A
112.3W/0.50A
