ETC Installation Guide
ColorSource Linear Pearl v1.7
ColorSource Linear Pearl v1.7
Page 16 of 20
ETC
Updating the fixture software
ETC recommends using UpdaterAtor software to manage software updates.
For more information on UpdaterAtor, see the
UpdaterAtor Software Quick
Guide
,
which you can download for free from
etcconnect.com
.
When you add a ColorSource fixture running a newer software version or
update a ColorSource fixture to a newer software version using UpdaterAtor,
you can use that fixture to push the newer software version to all connected
ColorSource fixtures.
You can push newer software versions from a connected fixture only on
ColorSource fixtures running software v1.3.0 or newer. Use UpdaterAtor to
update individual fixtures running versions older than v1.3.0.
1:
Remove power and DMX from the master fixture that is running the
software version that you want to push to other fixtures.
2:
Press and hold the Up and Down buttons simultaneously while
restoring power.
3:
The display will show
to indicate the update mode is
selected.
4:
Press the Mode button to start the update process.
• The display will alternate between
and the percentage
complete while updating.
• The master fixture will reboot once the update is complete.
