Bridge D4 Series Constant Voltage Driver Output Channels
55
Example Bridge Configurations
All Four Output Channels Bridged
Bridging four output channels can be done as shown below for control on output channel 1, or
on any output channel as long as all four switch blocks (S1–S4) are set the same. The illustration
and table below show all four output channels bridged together to form bridged output
channel 1.
Detail of four output channels bridged into one.
CH1
CH2
CH3
CH4
Wall-Mount D4 Driver 150
Wall-Mount D4 Driver 350
Rack-Mount D4 Driver 350
Note:
Do not bridge three or four output channels into one output channel on a D4
Driver 700.
D4 Driver 150 Switch Settings for Four Output Channels Bridged into One
Switch Block
(Output)
Switch Positions
1
2
3
4
5
6
S1 (LED 1)
Do not adjust from
factory setting
ON
OFF
OFF
OFF
Do not adjust from
factory setting
S2 (LED 2)
ON
OFF
OFF
OFF
S3 (LED 3)
ON
OFF
OFF
OFF
S4 (LED 4)
ON
OFF
OFF
OFF
D4 Driver 350 Switch Settings for Four Output Channels Bridged into One
Switch Block
(Output)
Switch Positions
1
2
3
4
5
6
S4 (CH 1)
Do not adjust from
factory setting
ON
OFF
OFF
OFF
Do not adjust from
factory setting
S3 (CH 2)
ON
OFF
OFF
OFF
S2 (CH 3)
ON
OFF
OFF
OFF
S1 (CH 4)
ON
OFF
OFF
OFF